White Moleanos Limestone Floor Renovated in Harrogate, North Yorkshire

These tiles are White Moleanos Limestone which I must say is not my favourite, you can just breath on them and they will stain, so not a practical choice for any floor really. They had been installed in the kitchen of a house in Harrogate and although it was only a small floor it was trapping the dirty and the owners were pulling their hair out trying to look after it.

I went over to survey the floor and explained to them Moleanos Limestone is a chalky stone from Portugal which is very porous and being so pale meant dirt easily stood out. With porous stone like this you need to ensure that the sealer is kept in good condition otherwise dirt will become ingrained in the pores and once that happens it becomes very difficult to clean effectively. In fact, once the sealer has worn off even dark coloured soles can mark it.

White Moleanos Limestone Floor Before Cleaning Harrogate

I carried out a small test patch, which was successful so once we had agreed a price, they were more than happy to go ahead with getting the work done. We booked a time the following week, the work would take a couple a days, one to deep clean and one to seal.

The property is in a lovely area of Harrogate which is well known for its tourist attractions, it is said that Harrogate spa water contains iron, sulphur and common salt. The town became known as ‘The English Spa’ in the Georgian era, after its waters were discovered in the 16th century. Later in the 17th and 18th centuries its waters (containing iron) were a popular health treatment, and this led to an influx of wealthy but unfortunately sickly visitors which in turn contributed significantly to the wealth of the town.

White Moleanos Limestone Floor Before Cleaning Harrogate

Cleaning a White Moleanos Limestone Tiled Kitchen Floor

To restore the appearance of the stone I used a set of diamond encrusted burnishing pads which clean and slowly hone the stone giving it a natural polished appearance. This is a slow steady process working through the different grades of burnishing pads from coarse to very fine. The pads are applied with water to lubricate and the soil generated is extracted with a wet vacuum afterwards.

Once the burnishing process was completed, I inspected the floor and was pleased to see that the floor was looking significantly better than when I had arrived. I gave the stone a final rinse and extracted as much moisture as possible with the wet vacuum before leaving for the day. The floor was left overnight to be sure that it would be dry before sealing. In the meantime, I asked the client to avoid walking on it.

White Moleanos Limestone Floor During Cleaning Harrogate

Sealing a White Moleanos Limestone Tiled Hallway Floor

I came back the next day and checked the floor was dry. All was well and so I proceeded to seal the floor using three coats of Tile Doctor Ultra-Seal which will add the protection the stone needed. Ultra-Seal is a premium, no-sheen, natural-look sealer. It provides maximum stain protection, especially in food preparation areas like the kitchen. It is also great for sealing the grout to prevent colour change from spillages.

White Moleanos Limestone Floor After Cleaning Harrogate

The client was very happy and satisfied with the floor which looked much cleaner and fresher. After discussing after-care they were confident they could keep the floor looking that way going forward.

White Moleanos Limestone Floor After Cleaning Harrogate

 

Source: Limestone Tile Cleaning and Sealing Service in Harrogate, North Yorkshire

Shine Restored on Dull Limestone Floor Tiles in Harrogate

I was recently at a property in the North Yorkshire town of Harrogate, undertaking what I initially thought would be the cleaning and polishing of a Cream Limestone tiled kitchen. However, as I began the cleaning process I quickly discovered that under the dirty grout lines someone had taken a lot of effort to paint with a small brush directly onto the grout using varnish!

Cream limestone floor before cleaning Harrogate Cream limestone floor before cleaning Harrogate

Removing Varnish from Grout

In a normal situation, I would have covered the whole floor with Tile Doctor Remove & Go to solve the problem, however compared to, say, adhesive or paint staining, varnish is very difficult to remove. So instead I opted for the long, yet necessary process of cleaning the grout manually with several thin wire brushes. Over the course of two days I managed to remove approximately 90% of the stubborn varnish – and could finally move onto cleaning and polishing the Limestone as originally planned.

Burnishing and Sealing a Limestone Tiled Kitchen Floor

The polish had been lost from the Limestone kitchen tiles over time, so I set about restoring it using a type of polishing known as burnishing. This involves the application of diamond encrusted pads of varying grit to the floor to gradually buff the stone and achieve an aesthetic and durable shine. Burnishing is most commonly used on high-end stone such as Marble, Travertine and, of course, Limestone.

At Tile Doctor, our burnishing system comprises four burnishing pads, ranging from a Coarse grit to a Very Fine grit. After applying the first three pads (Coarse, Medium and Fine), I gave the tiles a further clean with Tile a Doctor Pro Clean, which is our alkaline cleaner, to remove any residue from the burnishing process. I then rinsed the floor with clean water and soaked up the residue with a wet vacuum, before leaving it to dry.

The floor was then polished to a satin finish using the fourth and final Extra Fine burnishing pad. I sealed it using a couple of coats of Tile Doctor Ultra-Seal, an impregnating sealer designed to provide maximum protection against dirt and stains.

Cream limestone floor after cleaning Harrogate Cream limestone floor after cleaning Harrogate

The combination of burnishing and sealing always makes a huge difference to Limestone tiles. Here, the finished result was almost like a new floor! The customer was both amazed and very pleased with the transformation.
 
 
Source: Limestone Tile Cleaning and Polishing Service in North Yorkshire

Maintaining White Limestone Floor Tiles

Knaresborough is a historic town in North Yorkshire, popular amongst holiday goers for its numerous attractions. I travelled to the area not to visit the attractions, however, but to visit a customer, whose fantastic white Limestone tiled floor was in need of a deep clean.

White Limestone Floor Before Cleaning in Knaresborough

Limestone is a porous material, meaning that without a sealer dirt can become easily trapped in the pores of the stone, as well as the grout. With this Limestone being naturally white, the dirt was particularly visible, making the tiles look very unsightly. Once deep cleaned the floor would also require a fresh seal to provide long-term protection against muck and stains.

White Limestone Floor Before Cleaning in Knaresborough

Burnishing a Dirty White Limestone Floor

To treat high end, polished stone floors such as Limestone and Marble, we recommend using the process of burnishing. Simply put, burnishing involves the application of diamond encrusted pads of varying grits, which serve to break down dirt and then polish the stone.

Typically, we use a set of four pads in gradual succession; here, I used the first three pads on the first day. Starting with the Coarse grit pad, along with a little water as lubrication, I polished the Limestone, before repeating the process with Medium and Fine pads to refine the polish.

On the same day, I also cleaned the grout using a solution of one part Tile Doctor Pro-Clean (a high alkaline cleaner) and three parts water. On Limestone floors you should take care to avoid even mildly acidic cleaning products as sensitive stones like Limestone and Travertine can be damaged over time. After successfully cleaning the dirt grout lines, I rinsed the floor before using a wet-vac machine to soak up the residue. The floor was then left to fully dry overnight.

Sealing a White Limestone Floor

The next day, I returned to the property to complete the restoration. Before sealing the tiles, I applied the fourth and final of the burnishing pads to achieve a Very Fine polish.

White Limestone Floor After Cleaning in Knaresborough

To seal the tiles, I used Tile Doctor Ultra Seal, the customer didn’t want to darken the stone in the way that a colour enhancing sealer might. Additionally, the customer required a more natural finish, which this product provides.

Then, I polished the excess sealer off with a white buffing pad and left it to dry for an hour, before polishing a final time with the Very Fine grit burnishing pad. With this method, the floor was perfectly dry and the customer could walk on the tiles as soon as I left.

White Limestone Floor After Cleaning in Knaresborough

Before leaving my very satisfied customer to enjoy their newly restored Limestone floor, I made sure to impart some aftercare advice. I recommend Tile Doctor Stone Soap for the Limestone (and other polished stone) as its helps to retain the sheen whilst also acting as a general cleaning agent.
 
 
Source: Limestone Tile and Stone Cleaning and Sealing Service in North Yorkshire

Resolving Limestone Installation Problems

Details below of a recently laid Ca Pietra Hazlebury Tumbled Limestone tiled floor that retails at £180m2 and should have been stunning however the fitter had ruined it and left it covered in grout haze. The owner of the house in Shipley was unable to get the problem resolved and asked us to take a look.

Ca Pietra Hazlebury Tumbled Limestone in shipley covered in Grout Haze

Removing Grout Haze from Tumbled Limestone Tiles

To restore the appearance of the stone it was necessary to wash the surface in an acid based product called Tile Doctor Grout Clean-Up which is diluted with water and left to dwell on the surface for 1 to 2 minutes before being scrubbed in. Limestone is especially sensitive to acids so you really do have to work fast and wash it off as soon as it’s done its job followed by a thorough rinse with fresh water.

Once the floor was free of the grout it was given a thorough clean with a strong dilution of Tile Doctor Pro-Clean which is a strong alkaline cleaner and sealer remover. This was worked into the floor using a scrubbing pad fitted to a rotary machine and the resultant soiled solution removed with a wet vacuum. After this the floor was given another thorough rinse and then left for two days so it could dry out.

Polishing and Sealing Tumbled Limestone Tiles

With the grout haze removed we were able to bring back the polish on the Limestone using a very fine 3000 grit burnishing pad attached to a rotary machine.

Ca Pietra Hazlebury Tumbled Limestone in shipley After Polishing

The tiles were then sealed using coats of Tile Doctor Ultra Seal which is a penetrating sealer that soaks into the pores of the stone filling them so dirt can’t penetrate below the surface but without changing the appearance of the stone. It’s highly recommended for Polished Limestone and will provide on-going stain protection.

Ca Pietra Hazlebury Tumbled Limestone in shipley After Polishing

The resulting transformation was remarkable and as you can image the customer was highly delighted.
 
 
Source: Tile, Stone and Grout Problems Resolved in North West Yorkshire

Cleaning and Polishing Classic Limestone Flagstones

These rather dirty but beautiful classic Minster Limestone flagstones had been installed in the Kitchen of a house in the village of Austwick. They were now overdue for a deep clean and polish and so we were asked to do to the work.

York Minster Limestone Before Cleaning Harrogate York Minster Limestone Stairs Before Cleaning Harrogate

Stripping and Polishing Limestone Floor Tiles

To restore the surface of polished stone we use a set of diamond encrusted pads however before starting we gave the floor tiles a general clean with a dilution of Tile Doctor Pro-Clean mainly to clean-up the grout and secondly to remove any loose surface grit. This was rinsed away and removed with a wet vacuum before starting the burnishing process using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water. The coarse pad strips off dirt and old sealers from the tile and the resulting slurry is then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

York Minster Limestone During Cleaning Harrogate York Minster Limestone During Cleaning Harrogate

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Ultra Seal which is a penetrating sealer that soaks into the pores of the stone filling them so dirt can’t penetrate below the surface. As well as offering excellent protection Ultra Seal doesn’t enhance the stone the stone in anyway giving it a natural look. Once sealing was complete and dry the Limestone tiles were given a final buff with a soft white pad.

York Minster Limestone After Cleaning Harrogate York Minster Limestone After Cleaning Harrogate

I think you will agree that the Limestone tiles now look much better and now that’s it’s been sealed cleaning the floor should be so much easier.
 
 
Source: Residential and Commercial Stone and Grout Cleaning in North West Yorkshire