Getting the best out of a natural stone floor isn’t straight forward and we often get calls from customers who have come to the realisation they need help. An example of this being a lady from the village of Helsby who got in touch after her husband had given up following spending two days cleaning their Limestone tiled kitchen floor but actually making it worse.

Burnishing and Cleaning a Limestone Tiled Floor

On arrival the first step was to give the floor a general clean with a focus on cleaning the grout lines and removing any grit from the floor. I used a dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on grout and stone. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes before being scrubbed in along the grout line using a stiff narrow brush to get them really clean. Once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum.

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Limestone, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone.

Sealing a Limestone Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Limestone first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Limestone, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained.

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked much cleaner.
 
 
Source: Limestone Tile Cleaning and Sealing Service in Cheshire