Polishing large format Limestone tiles

These photographs are from a Limestone tiled floor installed at a residence in Cambridge. The tiles were in good condition but the shine on the Limestone had worn off leaving them looking dull and the owner wanted them re-polishing.

Polishing Limestone Tiles in Cambridge During Cleaning Polishing Limestone Tiles in Cambridge During Cleaning

Stripping and Polishing Limestone Floor Tiles

To restore the shine on polished stone we use a set of four diamond encrusted pads however before starting we gave the floor tiles a general clean with a dilution of Tile Doctor Pro-Clean mainly to clean-up the grout but also to remove any loose surface grit. The cleaning solution was rinsed away and removed with a wet vacuum before starting the burnishing process using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water. The coarse pad strips off dirt and old sealers from the tile and the resulting slurry is then removed using a wet vacuum.

The next pad after coarse is a medium grit which you apply in the same way followed by the fine pad again with a little water until the floor is polished. The final step to bring up the polish on the Limestone is to apply the last “Very Fine” pad which is fitted to the rotary machine and run over the floor tiles until they are buffed to a nice shine.

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow Sealer which is a penetrating sealer that soaks into the pores of the stone filling them so dirt can’t penetrate below the surface. As well as offering excellent protection Colour Grow lifts the colours in the stone enhancing it’s natural beauty. Once sealing was complete and dry the Limestone tiles were given a final buff with a soft white pad.

Polishing Limestone Tiles in Cambridge After Cleaning Polishing Limestone Tiles in Cambridge After Cleaning

 
 
Source: Residential and Commercial Stone and Grout Cleaning Services in Cambridgeshire

Cleaning and Polishing Classic Limestone Flagstones

These rather dirty but beautiful classic Minster Limestone flagstones had been installed in the Kitchen of a house in the village of Austwick. They were now overdue for a deep clean and polish and so we were asked to do to the work.

York Minster Limestone Before Cleaning Harrogate York Minster Limestone Stairs Before Cleaning Harrogate

Stripping and Polishing Limestone Floor Tiles

To restore the surface of polished stone we use a set of diamond encrusted pads however before starting we gave the floor tiles a general clean with a dilution of Tile Doctor Pro-Clean mainly to clean-up the grout and secondly to remove any loose surface grit. This was rinsed away and removed with a wet vacuum before starting the burnishing process using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water. The coarse pad strips off dirt and old sealers from the tile and the resulting slurry is then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

York Minster Limestone During Cleaning Harrogate York Minster Limestone During Cleaning Harrogate

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Ultra Seal which is a penetrating sealer that soaks into the pores of the stone filling them so dirt can’t penetrate below the surface. As well as offering excellent protection Ultra Seal doesn’t enhance the stone the stone in anyway giving it a natural look. Once sealing was complete and dry the Limestone tiles were given a final buff with a soft white pad.

York Minster Limestone After Cleaning Harrogate York Minster Limestone After Cleaning Harrogate

I think you will agree that the Limestone tiles now look much better and now that’s it’s been sealed cleaning the floor should be so much easier.
 
 
Source: Residential and Commercial Stone and Grout Cleaning in North West Yorkshire

Limestone Tiled Floor problems resolved in Knightsbridge

Details below of a Limestone Tiled Floor we cleaned and polished in the kitchen of a flat in Knightsbridge, the customers were waiting to move into their new home and the kitchen floor was dirty, especially after they had some new tiles fitted and looked out of place.

They had other companies in to quote but were not impressed by their knowledge of how to clean the floor, and one large London based company sent some people to do a test patch with completely inappropriate equipment and failed to make any difference at all. Sorting out natural stone floors is what we do for a living so and although I was unable to carry out a demo on this occasion I managed to get the job by answering all their questions in detail setting realistic expectations without promising the earth and showed them pictures from a portfolio of work we had done before.

Limestone Tiled Floor Kensington Before and After Cleaning

Stripping and Polishing Limestone Floor Tiles

Before starting to clean the floor we removed the plinths from the kitchen units and then using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water began to strip off the old dirt and seal from the floor, the resulting slurry was then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. The Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout clean as well.

To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

Limestone Tiled Floor Kensington Before and After Cleaning

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to provide maximum stain protection on natural stone floors whilst bringing out the colour in the stone, this was followed with a final buff with a soft white pad.

Limestone Tiled Floor Kensington Before and After Cleaning

The customers were really pleased with the finish and pleased that they chose a Tile Doctor to do the work. I should mention that they were not expecting to be able to see the new and the old tiles blend and were really happy that we could achieve this for them.
 
 
Source: Limestone Floor Cleaned, Polished and Sealed in Knightsbridge

Limestone Tiled Floor and Grout Rejuvenated

This Limestone tiled floor was installed at a property in Fulham, I was asked round to quote for cleaning the floor and whilst I was there I did a patch test. The test worked very well and the owner couldn’t believe that the grout was actually white not dark grey.

Cleaning Polished Limestone Floor Tiles

The first step was to give the floor a quick sweep to remove any surface grit etc. Before starting the burnishing process which we use on hard stone surfaces such as polished Limestone to clean and bring up the shine on the floor. The burnishing pads and encrusted with diamonds and come in a pack of four consisting of Coarse, Medium, Fine and Very Fine 17” pads. I started with a coarse pad which removes sealers and dirt from the floor, a little water is added to lubricate the process.

Once we had finished with the coarse pad the grout was cleaned up using Tile Doctor Pro-Clean diluted 1 part cleaner to 4 parts water. The solution was then scrubbed into the grout with a stiff hand brush until it was clean. The floor was then rinsed with clean water to remove any cleaning products and we then continued with the remaining burnishing pads applied in order with Medium, Fine and Very Fine until the floor was thoroughly cleaned and polished. We left for the day at this point to allow the tiles to dry overnight.

Sealing Limestone Floor Tiles

The following day we returned to seal the floor using two coats of Tile Doctor Colour Grow which is a great sealer for natural stone such as Limestone as it works to lift the colours out of the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white polishing pad.

The customer was really pleased with the result and couldn’t believe that the floor could look so good.
 
 
Source: Limestone Floor Rroblems Resolved in East-Surrey