Cleaning a Limestone Floor in a 14th Century Oxfordshire House

I was asked to clean the Limestone tiled floor of a very old house in the Village of Radcot which is close to the River Thames and dates to the 14th Century. Being close to a river is very scenic but can be problematic and I was told the house had experienced flooding in recent years.

Whilst the Limestone floor clearly wasn’t as old as the house it was definitely in need of some attention to remove the dirty that had become ingrained into the pores of the stone and restore its appearance.

Limestone Tiled Floor Before Cleaning Radcot

Cleaning Limestone Floor Tiles

My first step was to let the floor soak for ten minutes in a strong dilution of Tile Doctor Pro-Clean, which is a strong Tile and Grout cleaner. The product was then scrubbed into the floor using a deck brush to remove any surface dirt. I also took the opportunity to clean up the grout before rinsing off the now soiled cleaning solution with water and extracting it with a wet vacuum.

Next I turned my attention to the stone tiles which would need to be stripped back, re-honed and then sealed to protect them. I find the best way to achieve this on stone is through the application of a set of Diamond encrusted burnishing pads.

I started the burnishing process by fitting a coarse 400 grit no.1 burnishing pad to a floor buffer and running at a slow speed, applied the pad over the whole floor. This coarse pad is designed to strip off old coatings and dirt from the tile. You use a little water to help lubricate and once complete it’s necessary to rinse the area with water to remove the soil that is generated. The next step is to start building back the polished surface with the 800 and then 1500 grit pads which are applied in the same manner.

This floor was left to dry before moving onto the final stage of the polishing process which is to apply the very fine 3000 grit which further restores the appearance of the Limestone tile. This last pad is applied dry with a small amount of water sprayed onto the surface to help bring up the shine.

Sealing Limestone Floor Tiles

With the floor dry I moved onto sealing the tiles in-order to protect them from dirt and staining. I used a couple of coats of Tile Doctor Colour Grow for this purpose as this particular sealer enhances the natural colours in the stone. It’s also an impregnating sealer that works by occupying the pores in the stone thus preventing dirt from becoming ingrained in the stone.

My pictures of the floor are not brilliant but hopefully you can see how much more colourful the floor now looks.

Limestone Tiled Floor After Cleaning Radcot

 
 
Source: Limestone Tile Cleaning and Polishing Service in Oxfordshire

Poorly Sealed Limestone Tiled Floor Cleaned and Resealed in Middlesex Kitchen

This Limestone tiled floor in Twickenham, Middlesex had only been laid eighteen month earlier. However, due to an in-effectual seal on the floor, the soil had accumulated and embedded into the pores of the stone. Limestone like many types of natural stone is a very porous stone and it doesn’t take much for the dirt to build up and start to discolour the floor.

Limestone Tiled Floor Before Cleaning Twickenham

The tile had been laid through out the Kitchen and adjacent dinning area and the solution was quite straight forward and simply required and a good clean and re-seal as detailed below.

Cleaning Limestone Tiles

We started with an application of a strong dilution of Tile Doctor Pro-Clean which was sprayed onto the floor and allowed to dwell for five to ten minutes. Following this, we used a heavy duty floor scrubbing machine in order to break the soil away and existing sealer from the stone.

Once we were happy that the soil and sealer had been dislodged, we then removed all of the chemical and soil via our extraction machine. This applies pressured water onto the stone whilst vacuuming all of the waste away, leaving the floor as clean and fresh as it could possibly be.

Sealing Limestone Tiles

After allowing the floor to dry out overnight, we returned the next morning to apply the seal. Two coats of Tile Doctor Colour Grow sealer were applied to give the best protection possible. Colour Grow penetrates into the pores of the stone protecting it from within whilst also enhancing its natural colours and contrast.

Limestone Tiled Floor After Cleaning Twickenham

Once done the floor looked like it had just been laid and the customer was extremely happy with the end result.

Limestone Tiled Floor After Cleaning Twickenham

 
 
Source: Limestone Tile Cleaning and Sealing Middlesex