Removing Scratches and re-sealing Black Limestone Tiles for Godalming Property Developer

A property developer contacted me looking for a solution to two problems with a Black Limestone floor he had installed in the kitchen of a house in Godalming. The first problem was the sealer used didn’t do anything to enhance the look of the Limestone tiles and the new owner was very unhappy with their appearance which was now light in colour as opposed to the black Limestone he was expecting. Secondly the kitchen fitter had dragged a wooden box with a rogue screw hanging from the bottom across the floor in several places leading to scratches.

Scratched Black Limestone Floor Before Godalming

With direct trains to London Waterloo taking 45 minutes Godalming is a very desirable place to live and a property hotspot. Fortunately for the developer I was able to advise that both problems were fixable. Firstly, I had to remover the existing sealer, tackle the scratches and then re-seal and polish. Keen to have the problem resolved I was instructed to go ahead with the work.

Scratched Black Limestone Floor Before Godalming

Removing Sealer and Scratches from Black Limestone tiles

The old sealer was not doing anything to enhance the look of the Black Limestone and simply applying a new sealer on-top of the old would not have improved the appearance, so it had to be stripped off first. To remove the old sealer, I attached a coarse 400-grit Diamond burnishing pad to a floor buffer and ran it over tiles with water for lubrication. The process generates a fine slurry so once the whole floor had been burnished in this way the slurry was rinsed off with more water and then extracted using a wet vacuum.

Next, using a small handheld burnishing block I very carefully removed the scratches that the kitchen fitter had caused. Like the burnishing pads these blocks come in different grades and are encrusted with industrial diamonds.

Once happy I was happy that the scratches were gone, I continued to burnish the floor using a medium 800-grit and then a fine 1500-grit pad. These pads are used to hone the stone and build-up its polished appearance. As with the 400-grit pad water is used to lubricate the process and the floor is rinsed and extracted after each pad.

Sealing Black Limestone Tiles

I left the floor to dry off and returned after the weekend to apply the sealer. This is essential for any stone floor as otherwise dirt will become trapped in its pores making it difficult to clean effectively. Sealers can also enhance the appearance of the stone and in this case, we wanted to really bring out its natural dark colour. With this in mind I chose Tile Doctor Colour Grow which is an impregnating sealer that protects from within and includes a colour enhancing agent that improves colour and, in this case, considerably intensified the black colour of the stone to achieve the effect the customer wanted.

Scratched Black Limestone Floor After Burnishing Godalming

Before leaving I ran over the floor with a white buffing pad to add an extra lustre to the stone, by the time I had finished the floor looked amazing. Unfortunately, I never got to hear how the customer felt about the new appearance of their Black Limestone floor however the property developer was much relieved as he thought the whole floor might need to be replaced.

 

Source: Limestone Tile Cleaning and Polishing Service in Godalming

London White Stone Cleaned and Sealed in Leyburn, North Yorkshire

This floor is London White Limestone which is a very expensive but stunning stone that costs around £60 per square metre. It’s a pale stone that has a wonderful texture and aged appearance that makes it quite unique. Unfortunately, however being a pale stone, it didn’t photograph well, especially in low light so apologies in advance for the poor photographs.

The stone was installed in a very large area across much of the ground floor of this stunning house in the North Yorkshire spa town of Leyburn. The property was in the centre of the town which is just 13 miles from the Yorkshire Dales National Park. There were four areas in total that needed attention, two of which were still quite clean, the main areas that needed attention were the high traffic areas around the entrance hall and kitchen which needed a full clean. The sealant had started to break down and with the stone being white, the floors were looking a bit dirty and drab.

London White Limestone Before Cleaning Leyburn London White Limestone Before Cleaning Leyburn

The two other rooms were only laid around a year ago and were still clean and unmarked however due to the state of the other floors the customer was concerned about the original sealer that had been used and so I agreed to top up the seal in these rooms with a different product to add more protection. Lithofin Stain-Stop had been used previously which from my experience isn’t up to sealing Limestone properly, so l said l could apply a more effective sealer which would penetrate the existing and provide more protection. To make matters worse the client had been using household cleaners which weren’t suitable for cleaning a sealed floor. We agreed a price for the work to be carried out, which the client was happy with, the work was scheduled in for a few weeks later.

Cleaning a London White Limestone Tiled Ground Floor

After adding protection to the skirting boards, I started cleaning the stone in the entrance and kitchen areas. I find you get the best results on Limestone by applying a series of Diamond encrusted honing pads which clean and hone the stone. They are applied in sequence starting with a coarse 400-grit pad followed by the medium 800-grit and then fine 1500-grit pad. The pads are applied with water to provide lubrication and the floor rinsed in between the application of each pad with the soil being extracted with a wet vacuum.

If you have read any of my other posts, you are would probably be expecting me to follow-up the burnishing process with a 3000-grit polishing pad however that wasn’t required in this case as we only use that on polished stone to achieve a deeper shine. The immediate result was a lightly polished floor which looked much brighter than before.

Sealing a London White Limestone tiled Ground Floor

The floor was left overnight to dry off, I double checked with the moisture meter that the previously cleaned area was dry and then all four areas were sealed the next day using a couple of coats of Tile Doctor Ultra-Seal. This is a premium, no-sheen, natural-look, solvent-based penetrating sealer which is created to provide maximum stain protection without changing the appearance of the beautiful stone floor.

London White Limestone After Cleaning Leyburn London White Limestone After Cleaning Leyburn

For after care I recommended to my customer the use of Tile Doctor Stone Soap which will clean the floor without prematurely eroding the sealer. The client was very happy with the finish and thankful for the maintenance advice that will help them maintain their beautiful stone floor in good condition.

 

Source: Limestone Tile Cleaning and Sealing Service in Leyburn, North Yorkshire

Putting the shine back on Limestone Floor Tiles

We recently worked on a Limestone tiled floor in the kitchen of a house in the picturesque village of Pewsey. The Limestone floor tiles were in good condition but had lost their shine and lustre and the grout had some staining.

Limestone Floor Tiles In Pewsey Before

Cleaning Limestone Floor Tiles

We started by cleaning the grout using a strong dilution of Tile Doctor Pro-Clean which was left to dwell on the floor for around ten minutes before being scrubbed it into the grout lines with a stiff grout brush. We then removed the dirty cleaning solution with a wet vacuum and rinsed the floor with clean water to remove any surplus product.

The next step was to burnish the Limestone tiles using a set of diamond burnishing pads. You start with pad number 1 in conjunction with a little water, the number 1 pad is a coarse pad designed to remove old sealers and other surface coatings and clean at the same time. Once the clean water turned a milky consistency it was removed using a wet vacuum and the floor rinsed. We carried on the same process with the next 2 step pads which are medium and fine grade pads and then gave a final rinse to remove any slurry produced.

Sealing Limestone Floor Tiles

We left the tiles to dry overnight and returned the next day to finish the floor first confirming it was dry by taking multiple readings using a damp meter. The result was positive so we dry buffed the floor using a Green buffing pad fitted to a rotary machine to shine the surface. Next step was to apply two coats of Tile Doctor Colour Grow with a smooth paint pad leaving it to dry before further buffing the floor with a white pad to bring up the shine. Colour Grow is a versatile sealing product that is designed to bring out the colours in natural stone whilst providing lasting stain protection.

Limestone Floor Tiles In Pewsey After

Source: Residential and Commercial Limestone Tile Cleaning in Wiltshire

Cleaning and Polishing Classic Limestone Flagstones

These rather dirty but beautiful classic Minster Limestone flagstones had been installed in the Kitchen of a house in the village of Austwick. They were now overdue for a deep clean and polish and so we were asked to do to the work.

York Minster Limestone Before Cleaning Harrogate York Minster Limestone Stairs Before Cleaning Harrogate

Stripping and Polishing Limestone Floor Tiles

To restore the surface of polished stone we use a set of diamond encrusted pads however before starting we gave the floor tiles a general clean with a dilution of Tile Doctor Pro-Clean mainly to clean-up the grout and secondly to remove any loose surface grit. This was rinsed away and removed with a wet vacuum before starting the burnishing process using a rotary scrubbing machine fitted with a coarse diamond encrusted burnishing pad and a little water. The coarse pad strips off dirt and old sealers from the tile and the resulting slurry is then removed using a wet vacuum.

The burnishing pads come in a set of four so once we were done with the coarse pad we moved on to the Medium and then Fine pads again with a little water until the floor was polished. To bring up the polish on the Limestone tiles the last “Very Fine” pad was fitted to the rotary machine and run over the floor to buff it to a nice shine.

York Minster Limestone During Cleaning Harrogate York Minster Limestone During Cleaning Harrogate

Sealing Limestone Floor Tiles

Once the floor was dry we set about sealing it using two coats of Tile Doctor Ultra Seal which is a penetrating sealer that soaks into the pores of the stone filling them so dirt can’t penetrate below the surface. As well as offering excellent protection Ultra Seal doesn’t enhance the stone the stone in anyway giving it a natural look. Once sealing was complete and dry the Limestone tiles were given a final buff with a soft white pad.

York Minster Limestone After Cleaning Harrogate York Minster Limestone After Cleaning Harrogate

I think you will agree that the Limestone tiles now look much better and now that’s it’s been sealed cleaning the floor should be so much easier.
 
 
Source: Residential and Commercial Stone and Grout Cleaning in North West Yorkshire

Limestone Tiled Floor Stripped and Sealed

Details below of a Limestone tiled floor strip and seal job we did recently for a lady in Wimbledon, South West London. It was a fairly common Limestone problem which had lost its polished appearance and was looking dull.

Stripping the Limestone Tiled Floor

To resolve we had to stripped back the Limestone surface using a set of burnishing pads, these diamond encrusted pads come in a number of different colours each one does a different job from scrubbing to polishing. I started with the red pad together with water and then carried on with the white, then yellow pads using water. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry overnight.

Limestone Tiled Floor in Wimbledon Limestone Tiles in Wimbledon

Sealing the Limestone Floor

The next morning I arrived to find the floor had dried out enough for me to seal it which was done using a couple of coats of Tile Doctor Colour Grow which is a great sealer for lifting the natural colours in the Limestone floor as well as providing stain protection. Once the sealer had dried I then finished it all off with a quick buff using a white buffing pad.

Limestone Tile After Strip and Seal Limestone Tile After Strip and Seal

I’m not sure the photographs really show the difference in the floor however I can tell you that when the lady returned home from work that day she was over the moon with the transformation and wrote the following testimonial:

So pleased with the service and advice received. Prompt and Professional, My floor looks like new again. Would highly recommend and use again. Thank you.

 
 
Source: Limestone Floor Restoration in Wimbledon