Large Honed Limestone Kitchen Floor Polished in Daventry

The following photos show a recent job we undertook at a timber framed house in the village of Upper Boddington, just south of Daventry. The client was having a new kitchen installed but didn’t want to replace the floor as it was generally in good condition, just dull with some staining and general wear and tear.

As the photos show the kitchen units had already been removed and as the tiles were wall to wall this was an ideal time to have this work carried out as the kitchen was being reconfigured and the customer wanted the floor to look uniform throughout, we also included the hallway in the cleaning process.

Honed Limestone Floor Before Restoration Upper Boddington

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing and in the before photo you will see the specialised grinding and polishing equipment we use to achieve brilliant results and a professional finish.

Honed Limestone Floor Before Restoration Upper Boddington

As the tiles were worn and stained in the high traffic areas we applied Tile Doctor Pro-Clean which had been diluted and decanted into a pump-up sprayer. After leaving it to soak in for ten minutes it was scrubbed into the tile and grout using a rotary floor machine and a stiff brush. This was followed by washing and rinsing of floors with water and extracting the soil with a wet vacuum.

The next step was to apply a full set of Tile Doctor Stone Burnishing pads from 200 grit, 400 grit, 800 grit and finishing with 1500 grit for a honed look. We worked through the pads in 10 metre sections at a time lubricating with water and rinsing with water between each pad.

The kitchen and hallway floors were then allowed to dry out fully overnight.

Sealing Polished Limestone Tiles

The next day I returned to the property and completed the polishing process by applying the very fine 3000 grit burnishing pad with a little water and leaves a high shine finish.

The floor was then sealed with three coats of Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection without altering the colour of the stone. The sealer takes an hour to dry and with three coats to apply it took most of the day to finish.

Honed Limestone Floor After Restoration Upper Boddington

The customer was happy with the results and left the following 5-star review on our site.

“Superb Service Chris P, Daventry”

Honed Limestone Floor After Restoration Upper Boddington

 
 
Source: Limestone Tile Cleaning and Sealing Service in Daventry, Northamptonshire

Refreshing a Limestone Tiled Floor

These Limestone tiles, installed in a lovely residence in the ancient market town of Oswestry close to the English/Welsh border, had become dull and dirty over the years and I was asked to get them looking their best again. When I arrived to do the quotation the customer’s main concern was that the grout lines had become dirty, but when I completed a test clean on one tile and the grout around it they realised the tiles themselves were dirty and had lost their shine to become a mat finish.

Limestone Floor Before Cleaning and Polishing Oswestry Limestone Floor Before Cleaning and Polishing Oswestry

Cleaning Limestone Tiles

It was a large floor so working in sections I gave the floor a general clean using a mild dilution of Tile Doctor Pro-Clean which was spread over the floor with particular attention paid to getting the solution into the grout lines. The solution was left to soak in and eat through any dirt and a stiff grout brush was run along each grout line giving it a good scrub along the way. Next we removed any trace of product by using a wet vacuum to extract the now dirty cleaning solution and rinsed thoroughly with clean water.

There were a couple of holes in the Limestone that needed attention so these were filled with a matching colour. The next step was to use a set of diamond encrusted burnishing pads which attach to a rotary machine and burnish the floor with four different grits from coarse to super fine. To remove any remaining sealer and dirt the floor is burnished using a course pad and a little water to help lubricate passing over each tile around four times in the process. The resultant soiled water is rinsed away with clean water which in turn is removed using a wet vacuum. This process is then repeated with the remaining pads, rinsing between each pad until a nice polish is built up on the tile. I managed to finish with the 2nd and 3rd pads but it was getting late to completely finish the polishing so called it a day.

Cleaning Limestone and Limestone Tiles

When I arrived on the second day to finish the polishing process with the fourth super fine polishing pad and seal the floor the customer thought I had already finished polishing and was already happy with the shine we had achieved so far, so you can imagine how happy she when I told her there was more to do. Once I had finished polishing I applied a single coat of Tile Doctor Colour Grow which impregnates the pores in the stone to prevent other contaminates getting in there; Colour Grow also does a great job of bringing out the natural colours in the stone.

Limestone Floor After Cleaning and Polishing Oswestry Limestone Floor After Cleaning and Polishing Oswestry

The customer was very happy with the end result and left the following feedback:

“Joe’s work is excellent. He planned the work accurately and arrived punctually, and he works without leaving any mess. Our limestone floor is now as beautiful as when new. Highly recommended.”
 
 
Source: Tile and Stone Cleaning, Polishing and Sealing Service in Shropshire

Deep Cleaning Limestone Floor

This was a Limestone tiled floor that had seen better days, unfortunately the customer had not been given the right advice and had been cleaning the floor with a popular supermarket floor cleaning product which being slightly acidic had over time stripped all of the sealer off the tile. With no sealer present dirt and grime had become ingrained into the pores of the tile making it impossible to clean.

Limestone Bedford Olney before cleaning

Deep Cleaning Limestone Floor Tiles

To deep clean the floor I decided to use a medium dilution of Tile Doctor Pro-Clean which was left to soak into the tile for around thirty minutes before working it in with a rotary machine fitted with a black scrubbing pad.

We let the solution dwell a bit longer whilst we setup the Rotavac machine which is a brilliant piece of kit that directs fresh warm water under pressure onto the tile whilst simultaneously removing the soiled solution with a secondary vacuum back to a storage unit on the van. The combination worked well and the floor was soon looking a lot cleaner, there were some areas that needed further attention including the grout which we hand scrubbed along the grout lines.

Once happy that the tile and grout was clean the floor was then left to dry.

Sealing Limestone Floor Tiles

Once the floor was dry it was sealed using two coats of Tile Doctor Colour Grow which is a colour enhancing sealer which provides maximum stain protection on natural stone floors whilst bringing out the deep colour in the stone. The last step was to buff the floor to a nice shine with a rotary machine fitted with a white buffing pad.

Limestone Bedford Olney After Cleaning

The final result was amazing and the customer was very happy also to make sure we didn’t get called back too soon I gave them advice on how to clean the floor in the future using Tile Doctor Neutral Clean which is a PH neutral cleaner that is safe to use on Tile, Grout and Stone.
 
 
Source: Limestone Floor Deep Cleaned and Sealed in Bedford

Limestone Floor Maintenance in Little Chalfont

This Limestone tiled floor with Slate Inlays was installed in a house in Little Chalfont, Buckinghamshire; the previous sealer had failed and was no longer offering any protection allowing dirt to become ingrained in the stone and become dull from soiling.

Limestone Floor with Slate Inlays Before

Cleaning and Polishing Limestone Tiles

To get the Limestone Tiled floor back to its original condition we used a set of diamond encrusted 17” Burnishing Pads fitted to a heavy rotary buffing machine. It’s important to give the floor a quick clean first to prevent grit from getting trapped in the pads and leading to deep scratches on the surface. You start off with the coarse red pad together with a little water which can remove sealers before moving onto the other pads.

At this point we gave the floor a deep clean using Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product that’s safe to use on Stone floors mixed 50/50 with NanoTech Ultra-Clean which adds tiny abrasive particles into the solution; this combination is especially effective on grout so we took the opportunity to get into the grout lines as well. The resulting soiled solution was removed using a wet vacuum and the floor washed down with clean water before continuing the burnishing process with the White cleaning pad followed by the Yellow Polishing pad which smooth’s the surface and finally the Green pad which gives that high shine finish.

Sealing Limestone Tiles

The floor was washed down to remove any particles left over from the polishing and left to dry before we set about sealing using three coats of Tile Doctor Colour Grow. Colour Grow is recommended for a number of stone surfaces and does well to lift the natural colours in the stone as well as providing on-going surface protection.

Limestone Floor with Slate Inlays After

Before leaving we recommended that the customer use Tile Doctor Concentrated Tile & Stone Cleaner for cleaning going forward, like Pro-Clean it’s an alkaline cleaning product that will clean the stone without eating into the sealant. The house owner was very satisfied with the results and promised to recommend our services to family and friends.
 
 
Source: Limestone Tiled Floor Restored in Buckinghamshire

Limestone Kitchen Floor Restoration

The photographs on the page come from a house in Kensington, London which had recently been decorated. The Limestone Tiled floor was already in need of clean however to make things worse the decorators had managed to get paint splashes on the floor which they had removed using white spirit, this resulted in a patchy appearance which you should be able to make out in the photo below:

Limestone Tiled Floor Before Cleaning

Cleaning a Limestone Tiled Floor

To clean the floor we applied a solution of Tile Doctor Pro-Clean which is a heavy duty alkaline cleaning product specially designed for cleaning stone floors. This was left to dwell for a while and then agitated using a rotary machine fitted with a Black Scrubbing pad. The soiled solution was then removed using a wet vacuum and the floor was then rinsed down with fresh clean water.

Limestone Tiled Floor Polishing

We used a set of diamond encrusted Twister Burnishing Pads fitted to a rotary buffing machine to polish the Limestone floor. These pads are ideal for restoring the shine on hard stone surfaces such as Limestone and Marble, the come in a set of four and you start with the Red pad together with plain water and this cuts through and removes surface grime and any surface seal. You then progress through one by one until you get to the final Green pad which provides a high polish.

Sealing Limestone Tiles

The floor was left to dry and I returned a couple of days later to seal it using two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that brings out the colours in natural stone. I carried out a water test to the customer so they could see that the floor was fully sealed; this involves placing a drop of water on the surface of the tile after each coat has dried, if the water forms a bubble on the surface then its fully sealed. The last step was to give the floor a final buff with a rotary machine fitted with a white buffing pad.

Limestone Tiled Floor After Cleaning

Customer was extremely happy because she had never seen the floor so clean.
 
 
Source: Limestone Tile Cleaning and Polishing in Kensington, London

Magnesium Limestone Floor Polished

The owner of this house in Wandsworth had imported these hard magnesium Limestone tiles direct from Italy and fitted them into a conservatory three years prior; over they years however they had lost their shine and started to go dull and look uninviting. This is fairly normal for polished stone which does need to be re-polished for it to keep its appearance however the owner was unhappy with the finish and wanted it re-polished. There were also a number of naturally formed holes in the Limestone floor and these needed filling to give a completely even appearance.

Stripping and Polishing the Limestone Tiled Floor

To resolve we filled the holes using grout coloured to match the Limestone surface and then proceeded to strip back the tile surface using a set of burnishing pads. These diamond encrusted pads come in a number of different colours each one does a different job from scrubbing to polishing. I started with the red pad together with water and then carried on with the white, then yellow pads using water. Finally when I had dried the floor I used a green pad to buff the floor up. This activity took most of the day so left the floor to dry overnight.

Imported hard magnesium limestone before

Sealing Magnesium Limestone Tile

The next morning I arrived to find the floor had dried out and so began to seal it which was done using a couple of coats of Tile Doctor Colour Grow which does what it says on the bottle and as well as provided stain protection lifted the natural gold colour in the Limestone floor. Once the sealer had dried I then finished it all off with a quick buff using a white buffing pad.

Imported hard magnesium limestone after

Apologies for not capturing the right angles with the before and after photographs above, there’s a lot of natural light in a conservatory so it’s tricky, I can tell you however that the owner was very pleased with the results and reported they looked better than when they were new.
 
 
Source: Hard magnesium limestone tiled floor polished in Wandsworth SW18