Restoring the Polish on Pet Soiled Limestone Floor Tiles in Biddenham

The client from the Bedford village of Biddenham had requested a quote to restore the look of their Limestone floor tiles which were laid throughout the whole ground floor including lounge, hallway and kitchen covering approximately 120m2 in total. The floor needed a thorough clean, filling of holes in high traffic areas followed by polishing and then sealing.

Limestone Tiled Lounge Floor Before Cleaning Biddenham

Over time, the floor in this busy household with 2 large dogs had become dirty and certainly worse for wear with all the use it had been getting. A quote was given and accepted and work was booked in to be carried out over 4 days with 2 Tile Doctor technicians on site for 2 of those days.

Limestone Tiled Kitchen Floor Before Cleaning Biddenham

Deep Cleaning Limestone Floor Tiles

We returned on the agreed date and started work to get this floor back to looking its best. My initial task before beginning the cleaning process was to apply a protective wrap around the oak doors and moving heavy furniture with sliders that the client couldn’t move themselves to give us a clear area to work in.

Limestone Tiled Hallway Floor Before Cleaning Biddenham

We then applied Tile Doctor Pro-Clean, diluted with water, to the floor. Pro-Clean is a strong alkaline cleaner that is suitable for use on all natural stone floors such as Limestone, Slate and Travertine.

After leaving the solution to dwell for a few minutes, We began to scrub over sections (Approximately 10m2 at a time) with a 17” scrubbing pad fitted to a buffing machine, whilst helping to remove a lot of the built up dirt on the surface of the tiles, the products also stripped off the old sealer, this was then rinsed and removed using a wet pick up machine. Following this we paid special attention to the grout lines, scrubbing with grout brushes and Tile Doctor Grout Clean-Up.

After completing the cleaning, I rinsed the floor again with clean water to remove any excess cleaning products. I then began to burnish the floor using Tile Doctor Diamond encrusted burnishing pads. This was done in four steps, as I used four different pads (coarse, medium, fine and very fine) rinsing the floor with water between each pad. Starting with a coarse pad and then gradually working up to the very fine pad achieving a high polish finish in the process. I finished off the process with a quick rinse and a white buffing pad to give the floor a final polish before I commenced the sealing of each area the following day to allow grout and stone to fully dry overnight.

Sealing Limestone Floor Tiles

The client requested a natural look finish so my choice of sealer was Tile Doctor Ultra Seal which will protect the floor but not change the colouring in any way. The sealer penetrates deep into the pores of the stone, providing water resistance and long-term protection from ingrained dirt and stains.

Limestone Tiled Kitchen Floor After Cleaning Biddenham Limestone Tiled Lounge Floor After Cleaning Biddenham

This was a large area so it took some time to complete but it was well worth the effort, certainly the customer thought so and left the following feedback on the Tile Doctor Feedback System.

Phil and his team were polite, friendly and professional at all times. Nothing was too much trouble for them and they worked very diligently to ensure they got the best possible outcome and the floors l. . . ok better than new at the end.

As you can see from the comments the client was extremely happy with the results and he has asked for details of our maintenance plan to keep his floors looking their best for years to come.

Limestone Tiled Hallway Floor After Cleaning Biddenham
 
 
Source: Limestone Floor Cleaning and Sealing Service in Bedfordshire

Achieving a Deep Durable Polish on Limestone Floor Tiles in Boxworth

Boxworth is a very small village situated to the north-west of Cambridge. In the Middle Ages, it had a significant population, but in the modern day there are only around 100 houses in the area including one belonging to my customer.

I was there to take a look at a large installation of Polished Limestone floor tiles which had been laid throughout the ground floor including the Kitchen, Dining, Utility room and hallway.

Limestone Tiled Kitchen Before Polishing Boxworth Limestone Tiled Dining Room Before Polishing Boxworth

Many people will already know that Limestone is a premium, yet somewhat sensitive natural stone. It’s also porous, meaning that dirt can easily become ingrained if the tiles are not sealed properly, or if the sealant has worn away. This leads eventually to a very unappealing, dirty, and dull appearance which often happens so slowly it hardly get’s noticed until one day you think, “I’m sure my floor looked better than that before!”.

Limestone Tiled Hallway Before Polishing Boxworth Limestone Tiled Utility Before Polishing Boxworth

In this case the sealer had degraded over time and my customer had called me in because she was now no longer happy with the appearance of the tiles. The lustre the tiles once had eventually disappeared and there was also damage in some areas caused by the placement of table and chair legs. I was asked to restore a high-quality polished finish to the tiles.

Cleaning and Burnishing Limestone Tiles

Before beginning the restoration, I took the necessary precaution of covering the walls and kitchen units to protect them from exposure to any cleaning products or mess.

To begin, I applied Tile Doctor Remove and Go, which is a high-performance stripping agent, to break down any old sealant remaining of the tiles. This product can also be used to clean the stone itself, as well as the grout lines.

After completing the initial cleaning process, I moved on to restoring the polish to the tiles. At Tile Doctor, we do this using a system we have developed called Burnishing. This system involves the application of Diamond encrusted pads – each possessing a different level of grit – to grind away the dirt from the stone, which is often stained or damaged. The process effectively resurfaces the stone leaving it looking new and fresh.

Firstly, I applied the Coarse 400 grit pad, fitted to a rotary machine, to grind away any excess muck and sealant lubricated with a little water. The resultant slurry was rinsed away and I followed up with the application of the Medium 800 grit pad to start the restoration of the polish again with a small amount of water, followed by the Fine 1500 grit pad for the second polish.

Finally, I applied the Very Fine 3000 grit pad to achieve the most refined and highest quality polish possible. The process of burnishing is a gradual but highly effective means of achieving this kind of finish.

Any slurry that was created through this process was removed using my truck-mounted hot water cleaning and extraction machine, resulting in minimum mess.

Sealing Limestone Tiles

After burnishing the tiles and to achieve a really hard wearing and high polish I covered the floor in Tile Doctor Shine Powder crystals and buffed them into the Limestone tiles using a White buffing pad. Then to give the floor extra protection I applied a coat of Tile Doctor Colour Grow, which impregnates the pores of the stone to prevent ingrained dirt.

Colour Grow also intensifies the natural colours in the Limestone, thus improving the appearance of the stone to an even greater extent. Following the application of Colour Grow, I gave the tiles a final light buffing with a soft red pad.

Limestone Tiled Kitchen After Polishing Boxworth Limestone Tiled Utility After Polishing Boxworth

The customer was extremely happy with the outcome, remarking that the work was carried “quickly and efficiently with no fuss.” I took lots of photographs of the process, so you can really appreciate the difference that was made.

Limestone Tiled Hallway After Polishing Boxworth Limestone Tiled Dining Room After Polishing Boxworth

 
 
Source: Limestone Tile Cleaning and Polishing Service in Cambridgeshire