Putting the Shine Back on Polished Limestone Kitchen Tiles in Cheshire

Getting the best out of a natural stone floor isn’t straight forward and we often get calls from customers who have come to the realisation they need help. An example of this being a lady from the village of Helsby who got in touch after her husband had given up following spending two days cleaning their Limestone tiled kitchen floor but actually making it worse.

Limestone Kitchen Floor Tiled Before Cleaning

Burnishing and Cleaning a Limestone Tiled Floor

On arrival the first step was to give the floor a general clean with a focus on cleaning the grout lines and removing any grit from the floor. I used a dilution of Tile Doctor Pro-Clean which is an alkaline tile cleaning product that is safe to use on grout and stone. The cleaning solution was applied by sponge mop and left to soak for ten to twenty minutes before being scrubbed in along the grout line using a stiff narrow brush to get them really clean. Once done the floor was then rinsed with clean water and the now soiled cleaning solution removed with a wet vacuum.

Limestone Kitchen Floor Tiled During Cleaning

The next step was to use a set of Tile Doctor burnishing pads to polish the stone back to a deep shine. The pads which are encrusted with industrial diamonds are applied with a rotary floor buffer in sequence from coarse to extra fine. The first pad has a Coarse 400 grit which is applied with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas, I applied the pad across the Limestone, rinsing in between and picking up the soiled solution with a wet-vac machine. I then repeated this same procedure with the Medium 800 grit pad which is the first stage polishing pad again rinsing with water after use. The next two pads are a Fine 1500 grit and Extra Fine 3,000 grit which really build up a high-quality polish on the stone.

Sealing a Limestone Tiled Floor

The floor was left to dry off fully overnight and I returned the next day to seal the Limestone first checking with a damp meter that the stone was dry. The customer wanted a natural look finish to the Limestone, so to seal the tiles I applied two coasts of Tile Doctor Ultra Seal which is an impregnating sealer doesn’t change the look of the stone in anyway. Ultra Seal is an impregnating sealer that works under the surface by occupying the pores in the stone thus preventing dirt from becoming ingrained.

Limestone Kitchen Floor Tiled After Cleaning Limestone Kitchen Floor Tiled After Cleaning

Once the sealer had dried the floor was treated to a gentle buff with a white pad to bring up the shine even further. Once complete the stone looked a lot healthier and the grout looked much cleaner.
 
 
Source: Limestone Tile Cleaning and Sealing Service in Cheshire

Poorly Sealed Limestone Tiled Floor Cleaned and Resealed in Middlesex Kitchen

This Limestone tiled floor in Twickenham, Middlesex had only been laid eighteen month earlier. However, due to an in-effectual seal on the floor, the soil had accumulated and embedded into the pores of the stone. Limestone like many types of natural stone is a very porous stone and it doesn’t take much for the dirt to build up and start to discolour the floor.

Limestone Tiled Floor Before Cleaning Twickenham

The tile had been laid through out the Kitchen and adjacent dinning area and the solution was quite straight forward and simply required and a good clean and re-seal as detailed below.

Cleaning Limestone Tiles

We started with an application of a strong dilution of Tile Doctor Pro-Clean which was sprayed onto the floor and allowed to dwell for five to ten minutes. Following this, we used a heavy duty floor scrubbing machine in order to break the soil away and existing sealer from the stone.

Once we were happy that the soil and sealer had been dislodged, we then removed all of the chemical and soil via our extraction machine. This applies pressured water onto the stone whilst vacuuming all of the waste away, leaving the floor as clean and fresh as it could possibly be.

Sealing Limestone Tiles

After allowing the floor to dry out overnight, we returned the next morning to apply the seal. Two coats of Tile Doctor Colour Grow sealer were applied to give the best protection possible. Colour Grow penetrates into the pores of the stone protecting it from within whilst also enhancing its natural colours and contrast.

Limestone Tiled Floor After Cleaning Twickenham

Once done the floor looked like it had just been laid and the customer was extremely happy with the end result.

Limestone Tiled Floor After Cleaning Twickenham

 
 
Source: Limestone Tile Cleaning and Sealing Middlesex

Polishing Blue Moleanos Limestone Floor in Yorkshire

It’s not too common that you find two very different natural stone tiled floors in the same property. However, this is exactly what I discovered on a recent visit to a farmhouse property in Ripley, near Harrogate in North Yorkshire. The owner wanted to restore both their Westmorland Green Slate tiled entranceway and a Blue Moleanos Limestone tiled floor.

Westmorland Green Slate originates from the Lake District in Cumbria – where it has been quarried for many centuries – and is known to be a high quality and popular choice for flooring due to its subtle and pleasant green shades. By contrast, Moleanos Limestone originates from Portugal and is one of more commonly found types of Limestone used in buildings across the world.

But while the two floors were very different, the customer’s objective was the same for both – to restore the appearance of the tiles and return the shine to the stone. Here’s how I did it.

Cleaning and Sealing Westmorland Green Slate Tiles

The first floor I tackled was the Westmorland Green Slate, situated at the entrance to the property. Naturally, given that the tiles are situated in a high traffic area, they were very dirty and required a deep clean.

Westmorland Green Slate Floor Before Cleaning in Ripley

To do this, I applied a strong dilution of Tile Doctor Pro-Clean, which is our high alkaline, multi-purpose cleaner, stripper, and degreaser. The product was scrubbed into the tiles using a scrubbing pad fitted to a heavy-weight rotary machine to strip away any old sealer and remove the ingrained dirt. One I was satisfied with the condition of the floor it was rinsed with water and a wet vacuum used to remove the now soiled cleaning solution.

Once the floor had been left to dry completely, I was able to give the floor a fresh seal in the form of four coats of Tile Doctor Seal and Go. This sealer is specially formulated to provide both a stain resistant surface seal and a durable low-sheen finish.

Westmorland Green Slate Floor After Cleaning in Ripley

Cleaning and Sealing Blue Moleanos Limestone Tiles

Whilst waiting for the slate floor to dry I moved on to restore the Blue Moleanos Limestone tiles, which covered a floor area of 20 square metres, but were looking very sad, tired, and lifeless.

Blue Moleanos Limestone Floor Before Cleaning in Ripley

To clean polished Limestone tiles, we typically use a process known as burnishing, which involves the direct application of four different diamond encrusted burnishing pads to grind away old sealers, dirt and stains, before polishing the stone to restore lustre.

First, I used a Coarse 400 grit burnishing pad to strip the floor of the old sealer and remove all grease marks and stains. I had to go over the floor with the pad twice to get rid of some particularly stubborn grease spots.

Having done that, I moved on to focus on building back up the polished appearance of the Limestone by applying the Medium 800 grit, Fine 1500 grit, and Very Fine 3000 grit burnishing pads, with a light spray of water to act as a lubricant with each. This achieved a high-quality satin finish, which I ensured will be protected for the long-term by sealing the stone with Tile Doctor Colour Grow – an impregnating and colour enhancing sealant.

Blue Moleanos Limestone Floor After Polishing in Ripley

It took me three full days of work to clean, polish and seal both floors – and the hard work paid off, as the customer was absolutely delighted with their rejuvenated tiles!
 
 
Source: Limestone Tile and Grout Polishing and Restoration in Yorkshire

Repairing Cracked Limestone Floor Tiles

This is a polished Limestone floor in the reception area of an office in the town of Wilmslow that had been installed around ten years prior. As you can see they were now in a poor state with ingrained dirt and cracks across the surface of some of the tiles.

Damaged Limestone Tiled Floor in Wilmslow Before

Deep Cleaning Limestone Tile and Grout

The polished Limestone tiles needed to be cut back and refinished with a set of diamond encrusted burnishing pads however my first task was to clean the grout lines by applying a medium dilution of Tile Doctor Pro-Clean and scrubbing it in with a stiff narrow brush. I gave the grout a rinse with hot water and removed the now soiled water with a wet vacuum.

The next task was to start the burnishing process by running a course pad fitter to my rotary machine over each tile lubricated with a little water. The coarse pad removes the dirt from the Limestone and resultant slurry is washed away with more water and the wet vacuum. This process is repeated with the “medium” and “fine” polishing pads which restore the surface and build up the polish back on the tile.

Before moving onto the final polishing pad I tackled the large cracks in the tile by filling them with a colour matching resin. There could be a number of reasons for the cracks but typically it would indicate some sort of movement in the subfloor. A common cause is due to the concrete base was not being given sufficient time to dry out before being tiled over and shrinkage in the concrete as it dries caused movement.

Repairing and Sealing Limestone Tiles

Once the resin had dried I moved onto to apply the final “Super Fine” polishing pad which brings up the polish on the Limestone to that final deep level again using a little water and rinsing down afterwards.

Once the floor was dry it was then sealed with two coats of Tile Doctor Colour Grow which is an impregnating sealer which penetrates into the pores of the stone protecting it from within, it also had the added benefit of bringing out the natural colours in the stone enhancing the look of the floor.

Damaged Limestone Tiled Floor in Wilmslow After

 
 
Source: Professional Tile, Stone and Grout maintenance service in Cheshire

Refreshing a Limestone Tiled Kitchen

This wonderful Limestone tiled floor was installed in the kitchen of a house near the town Staines where it had become dirty and tired, helped I might add by the customers dog who loved to swim in rivers and get muddy at every opportunity. The customer was struggling to clean the floor, the grout lines wouldn’t come clean and after spending hours scrubbing with a tooth brush and getting nowhere she called Tile Doctor.

Deep Cleaning the Limestone Tiled Floor

The floor was clearly in need of a deep clean and re-seal a very mild dilution of Tile Doctor Pro-Clean applied liberally across the floor and allowed to dwell and penetrate through the soils engrained into the grout. The grout lines were scrubbed with a specialist grout brush to release the soil and a rotary machine with a nylon deck scrubbing brush was used to release the soils from the Limestone tiles.

After approximately half an hour of scrubbing, the Limestone floor was extraction cleaned using our truck mounted clean and capture system. This system combines heat, pressure, and vacuum extraction to gently blast engrained soils away from the limestone and the grout lines.

To get the Limestone really clean a two pad diamond burnishing process was used; normally we use four pads however the customer did not want the stone to be too shiny and reflection was already starting to happen after the second pad had been applied. Using diamonds to refinish calcium stone such as marble, travertine and limestone is the modern chemical free solution to restoring the surface of sedimentary stones.

Sealing the Limestone Floor

After deep clean and refinishing the surface of the limestone, it was allowed to dry for a period of 36 hours, after this a liberal coat of Colour Grow which is a solvent based impregnator was applied to the stone. The sealer was allowed to sit on the surface of the stone for approximately 5 minutes before the excess was buffed away. Buffing the excess away is important to ensure a great, smear free finish.

Before leaving we recommended a system to care for the floor to ensure is continues to look as good as the day we left. Also we recently contact the client to check everything was ok and I’m proud to confirm they are still really pleased with the floor and after professional cleaning and sealing is now finding the floor is much easier to clean and maintain herself.
 
 
Source: Stone Floor Cleaning and Polishing in Berkshire