The photographs below are from a Limestone tiled floor which had been installed throughout the kitchen, hall and downstairs WC of a property in the Cambridgeshire village of Warboys. The owner was fed up with the floor which was not cleaning up after multiple attempts, he surmised it was overdue a deep clean and re-seal and so got in touch with us to do the work.

Limestone Tiled Floor Before Cleaning Limestone Tiled Floor Before Cleaning

We visited the property to survey the floor and could straight away that the owner was right to call us, the floor was definitely overdue a professional clean and he would not have been able to improve it without the right equipment. It was a large space and being the hallway and kitchen area, it was subject to a lot of foot traffic so was not looking its’ best. One of the biggest problems was the pitting in the Limestone which had trapped a lot of dirt which was difficult to shift. We discussed the options and the cost for the work which was agreeable to the client and arranged an appointment to return to carry out the renovation.

Deep Cleaning and restoring a Limestone Tiled Kitchen and Hallway Floor

Before starting I wrapped protective tape around the woodwork and removed the kickboards from underneath the kitchen units to protect them during the cleaning process.

Limestone and Travertine are notorious for pitting and on this floor the pits had trapped dirt making it look very unattractive. To deal with this I applied a strong dilution of Tile Doctor Remove and Go, allowed it to soak in and break-down the dirt and old coatings such as sealers for ten minutes and then scrubbed it in with a 400-grit diamond burnishing pad fitted to a rotary machine.

To remove the slurry that was generated I used our hot water pressurised extraction system which is a great tool that operates from a large compressor situated in my van which was parked outside. It fires hot pressurised water onto the floor via a floor spinner tool and then extracts the dirty water back onto a tank in the van. The pressure allows the water to penetrate deep into the pits of the stone to maximise the dirt extracted. This machine was an expensive investment however it saves a lot of time and allows me to achieve some outstanding results.

This process was repeated across the floor using the 800-grit and then the 1500-grit diamond burnishing pads using only water to lubricate and the extraction system to extract the slurry afterwards.

There were number of areas to cover so it took most of the day to clean all the floors, by the end of the day however the floor looked much cleaner and brighter. I left the floor to dry out overnight and came back the next day to apply a sealer.

Sealing a Limestone Tiled Kitchen and Hallway Floor

The next day I inspected the floor and checked it was dry before applying the sealer. To seal the Limestone I applied multiple coats of Tile Doctor Colour Grow which is an impregnating sealer which penetrates into the stone, protecting it from within and enhancing the natural colours in the stone in the process. Any excess sealant was buffed off the surface with a cloth after ten to fifteen minutes.

Limestone Tiled Floor After Cleaning Sealing Limestone Tiled Floor After Cleaning Sealing

The sealer really brought out beauty and colours in the natural stone and the floor was transformed in just two days. The owner of the house was happy with the results and left the following feedback on the tile doctor feedback system.

‘Tom did a superb job of cleaning my tiles to look like new. Very professional, methodical and proud of his work’
Brian A, Warboys

 

Source: Limestone Tile Cleaning and Sealing Service in Warboys, Cambridgeshire